Aurlane LAV174 BRICK 80 Mode D'emploi page 9

SETTING AND ADJUSTMENTS OF FURNITURE
EN
•
Please take note of the following adjustments made in order to have the sliding
drawers and the opening and closing of the doors correctly aligned:
±3mm
±2mm
Please use the knobs
on both sides of the
drawer to adjust its
height (up and down)
in order to avoid
friction with the upper
and lower parts.
Please use the screw
on the right side of the
drawer to adjust it
horizontally (left and
right) in order to avoid
friction with the side
parts.
5
05
Please use
this screw on
the sliding
rail to adjust
the door
height (up
and down) in
order to
avoid friction
with the
upper and
lower parts
Please use this screw on the
sliding rail to adjust its
position horizontally (front to
back) in order to avoid friction
with the side parts.
For a prefect alignment, you
must unscrew then pull the
sliding rail towards you
(diagram below). Place screw
then the sliding rail then
tighten..