Publicité
Les langues disponibles
Les langues disponibles
Glass Frame
bulb
Figure F
8.
Fasten the Bulb Support Latch back
into place. See Figure F, above.
9.
Slide the Bulb into place against the
Glass Frame.
10.
Slide the Lens and Lens Frame back
underneath the Glass Frame so that
the Bulb fits into the Lens Frame and
the Screws align with holes along the
Lens Frame.
11.
Fasten the Glass Cover to the
Lens Frame using the five removed
screws. Do not overtighten.
12.
Once all connections are secure, set
the Magnifying Lamp upright and on
its base and tighten the adjusting
knobs.
SKU 97448
For technical questions, please call 1-800-444-3353.
All manuals and user guides at all-guides.com
bulb
Support
Latch
INSPEcTION AND
MAINTENANcE
WArNING
FrOM AccIDENTAL
OPErATION Or ELEcTrIc
SHOcK:
before appliance inspection
or maintenance, make sure
the Power Switch (12) is
turned off, the cord is
unplugged, and the bulb has
cooled.
TO PrEVENT SErIOuS
INjurY FrOM APPLIANcE
FAILurE:
Do not use damaged Lamp.
Have the problem corrected
before further use.
1.
bEFOrE EAcH uSE,
general condition of the Magnifying
Lamp. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
2.
Regularly wipe off lamp with a soft
and moist cloth to prevent dust accu-
mulation.
TO PrEVENT
SErIOuS INjurY
inspect the
Page 6
Publicité
