BST FIRST Serie Mode D'emploi page 9

F I R S T- S e r i e s
D S P C O N T R O L O F F U L L R A N G E
The full-range loudspeaker DSP control menu selections are available for the 12" and 15'' loudspeakers.
Mode LIVE (default)
MUSIC
SPEECH
DJ
LOACTION TRIPOD (default)
MONITOR
WALL
SUPEND
SUB OFF(default)
80Hz
100Hz
120Hz
150Hz
TREBLE 0dB (default)
-12dB–+12dB
MID 0dB (default)
-12dB–+12dB
BASS 0dB (default)
-12dB–+12dB
DELAY 0-116m
BTH VOL OFF (default)
Bluetooth Connected
LCD DIM ON (default)
OFF
BRIGHT 5 (default)
1-10 adjust
RESET NO (default)
ARE YOU SURE?
YES OR NO
INFO Brand Product Name
Firmware Version
EXIT
* Notice !
The display returns to the home screen after twenty second of inactivity.
Mode Menu
The Mode menu is used to configure the type of sound the loudspeaker delivers.
Available options for this selection are : LIVE, MUSIC, SPEECH and DJ.
Ÿ LIVE - is used for live sound applications (Default).
Ÿ MUSIC - is used for recorded music playback.
Ÿ SPEECH - is used for spoken word applications.
Ÿ DJ - is used for recorded electronic music playback.
LOCATION Menu
Ÿ The Location menu is used to optimize the loudspeaker for different boundaries
Ÿ Available options for this selection are: TRIPOD, MONITOR, WALL, and SUSPEND.
TRIPOD - is used when the loudspeaker is placed on a tripod stand or placed on a pole.(Default)
Ÿ
MONITOR - is used when the loudspeaker is placed on the angled monitor panel in monitor position. This setting
Ÿ
compensates for the amount of low frequency boost created by placing the speaker close to the floor.

©
Copyright LOTRONIC 2018
www.bst-dj.com
Page 8