Black & Decker GST2000 Mode D'emploi page 7

3. Open the bottom 2 pole extention
clamps on each of the telescopic poles
and pull the telescopic poles upwards to
fully extend the poles. When fully
extended close the pole extention
clamps. Make sure that the telescopic
pole is securely locked into place and
can not be pushed downward.
All manuals and user guides at all-guides.com
4. Insert the trouser hanger into the slots in
5. Place the hose coupling over the steam
6. Place the steam head onto the steam
Note: Do not place the steam head into the
support clip untill after the flexible hose has
been connected to the base to prevent the
flexible hose from falling.
the clothes hanger and lock into place by
sliding it to the right.
outlet on the unit. Push it down firmly and
rotate it clockwise to lock it in place.
head support on the clothes hanger.
ENGLISH
7