Publicité
Les langues disponibles
Les langues disponibles
Programming playlists
•
While playing back from a music source, press the stop button.
•
Press the program button to enter the program mode. The word PROG will flash in the bottom left
corner of the display screen. A position number will also be flashing on the screen (eg: p01).
•
Press the next or back buttons to select which track you want to program into position. When you have
made your selection, press the program button to save it.
•
You can then repeat the same steps to fill in more positions.
•
When done, press play to begin your music playback. You can do this at any stage once you have pro-
grammed the amount of tracks you want.
•
At any stage during the program process you can press stop to cancel.
•
FUL will display on the LCD screen when the max amount of positions have been filled.
BT
•
Put the mode selector switch to "BT-AUX" position.,
•
Adjust your settings on the BT device and ensure that BT connection is turned on.
•
The LED light will be flashing on the BT indicator on the juke box. Pair your device with the jukebox. The
device will be displayed as "GRACELAND", the password is "0000"
•
When the red LED light begins to flash slowly, device and BT pairing has been successful and you can
now begin your music playback.
Note: If pairing of red LED does not blink, turn the selector switch off the "BT position" and try again.
Note: also ensure the "AUX" in switch on the back of the juke box is in the off position.
•
Use the external device to navigate through your media library. For established BT connections you
can also use the BT panel on the side of the jukebox.
All manuals and user guides at all-guides.com
15
Publicité
