Sylvania SCR0932 Manuel D'utilisation page 7

RADIO MODE
1. Press [AL. OFF/POWER] button to turn on the unit, the "FM" is the default mode
2. Manual searching: short press [HOUR/SKIP‐] button or [MIN/SKIP+] button to manually
adjust the FM stations
3. Auto‐searching: press and hold the [HOUR/SKIP‐] button or [MIN/SKIP+] button to auto
adjust the FM stations
4. Memory Set to obtain the stations: short press [CLOCK/MEM.] button to save the pre‐set
station, the display will show "P01", press [CLOCK/MEM.] button again to save the next pre‐
set station, also you can press [HOUR/SKIP‐] button or [MIN/SKIP+] button to select the pre‐
set stations. The display will show station frequency 5 seconds later, and will exit the time
display if you don't press any buttons for 5 seconds
5. Store the stations: select the station which you need stored, press and hold [CLOCK/MEM.]
button for 2‐3 seconds, "P01" on LED display will blinking, press [HOUR/SKIP‐] button or
[MIN/SKIP+] button to select the stored position, press [CLOCK/MEM.] button to confirm
6. Auto storage the stations: press and hold [FUNC./Auto‐scan] button, the unit can auto search
the stations from 87.5MHz to 108MHz, and auto store the searched stations. Can storage
total 20 stations
AUTO POWER OFF (SLEEP MODE)
Under any mode, press [SNOOZE/SLEEP] button, LED will show "90". Under standby mode,
you can continue press [SNOOZE/SLEEP] button to select sleep time from
"90→80→70→60→50→40→30→20→10→OFF", 5 seconds a er you set the sleep me, will
auto confirm the set and activate the AUTO POWER OFF function. If you need to power off
midway, press the [AL. OFF/POWER] button; check or change the auto power off time, after
activating the auto power off function, press [SNOOZE/SLEEP] button again, the LED will
show the rest auto power off time, press [SNOOZE/SLEEP] button again can select the next
level auto power off time (Such as: if originally you set "30", after 2 minutes, you check the
LED will show the rest 28 minutes, if you press [SNOOZE/SLEEP] button again, at this time,
the auto power off time will become "40"). If you need turn off the auto power off function,
repeat press [SNOOZE/SLEEP] button, until the LED show "OFF"
VOLUME CONTROL
Press [AL.1/VOL‐] button or [AL2/VOL+] button to adjust to your desired volume, the volume
has a total "0‐16" levels, the default volume is 8 level
TIME BACKUP
Install 2pcs AAA 1. 5V batteries (not included). In case of power failure the clock time will
continue. If no backup batteries are inserted the time will recover to a blinking "12:00" or
"0:00"after power failure.