Sylvania SCR1300-BLACK Guide D'utilisation

Components name:
RUNNING ALARM CLOCK ON WHEELS
SCR1300-BLACK
Control:
1.Installation battery:
Insert 4 X "AAA" batteries with proper polarity.
The batteries are not included.
User Manual
2.Time set:
"h" and "m" button to increase hours and minutes until accurate. Pressing the
the backlight on).
3.Alarm clock set:
Press the "a" button, start blinking the clock time, then pressing the "h" and "m"
to adjust hours and minutes. in order to adjust the hours and minutes quickly,
backlight on).
4.Snooze time set:
When continuously press the "a" two times, snooze time for the default in one
minute, and then press the "m",you need to choose the minutes from 0-9,if
elected 0,then the snooze function is not activated.
Leaving the mode: Press the "a" again or until the clock appear.
5. Turn on the alarm clock:
Press the alarm clock button, the alarm sign will appear on the screen.
6.Turn on the bull wheel:
Press the bull wheel button, the wheel sign will appear on the screen.
The next alarm: snooze can be set to ring again. If the alarm without turn off
at this time, the clock will begin to beep sound and run. If snooze-minute is set
to 0,it begins running at the sound of the alarm clock when turning on the bull
wheel button. Press the snooze button; it will default the snooze time as you
set before.
7.Turn off the alarm clock:
Press the alarm button again to turn off the alarm clock,the alarm sign will
disappear on the screen.
Remark:Once turn off the alarm,the wheel also can't running.
8. Turn off the wheel:
If you would like to sound the alarm and the alarm clock does not run away.
Press the bull wheel button again,the wheel sign will disappear on the screen.
9.Game:
Press the "t" and "h" button at the same time, the wheels will run for 3 minutes,
after 3 minutes the wheel will stop. The game coverage: the alarm clock will
forward,backward,clockwise and counterclockwise rotation,360 degree rotation
and irregular rotation.
Press the To begin
"h" and "t" the game
Remark:
1. The alarm clock has been running forward,please put it on the corner of the bed.
2. In order to avoid the alarm clock jump from 3 feet,please do not put it in a
place where is too high.The bed would be better no more than 3 feet high.
3.
on the carpet is too thick.
4. The alarm clock will be running in different directions about 5 seconds
moving and rings.
5. Sometimes, when the alarm clock hit the wall rotation;
6.
you to turn off the alarm clock.
7. The language of the alarm clock, combined with the blare of the ordinary
alarm clock.
8. Look at night time, you can press any key to start the backlight of 3
seconds
9. You can start the backlight for 3 seconds by any button when read the
time at night.
10.The clock will ring in advance when low power.The alarm clock needs to
replace the new batteries.
Frequently Asked Questions:
1. If the alarm is not ring,please check the following:
The alarm clock time must be checked am and pm,whether it has pressed
the alarm button and on the screen is showing.
2. If the alarm clock has blinking the low power warning,please replace the
batteries as soon as possible.