ASROCK FM2A85X Mode D'emploi page 25

All manuals and user guides at all-guides.com
2.7 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors
(SATA3_1: see p.2, No. 13)
(SATA3_2: see p.2, No. 12)
(SATA3_3: see p.2, No. 14)
(SATA3_4: see p.2, No. 15)
(SATA3_5: see p.2, No. 19)
(SATA3_6: see p.2, No. 16)
(SATA3_7: see p.2, No. 17)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
USB_PWR
P-4
(9-pin USB3_4)
(see p.2 No. 30)
1
P-3
USB_PWR
USB_PWR
P-6
(9-pin USB5_6)
(see p.2 No. 29)
1
P-5
USB_PWR
USB_PWR
P-8
(9-pin USB7_8)
(see p.2 No. 28)
1
P-7
USB_PWR
ASRock FM2A85X Extreme4 Motherboard
These seven Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
SATA3_5
Either end of the SATA data
cable can be connected to the
SATA3 hard disk or the SATA3
connector on this motherboard.
Besides two default USB 2.0
P+4 ports on the I/O panel, there
GND
DUMMY
are three USB 2.0 headers on
this motherboard. Each USB 2.0
GND
P+3
header can support two USB
2.0 ports.
P+6
GND
DUMMY
GND
P+5
P+8
GND
DUMMY
GND
P+7
25