Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Heating base
1. The lid, round tank, bottle and nipple shelves should be clean before sterilization. The
sterilizer shall be placed on a rm and safe level.
2. Pour 90 ml clean water on the stainless steel base, the water level should not be over the
air-outlet.
3. Put the bottles upside down on the bottle shelf and small items to be sterilized on the
nipple shelf then place the lid.
4. Plug in and press the "Sterilize and Dry-Out" button once for 30 minutes (B-1), or twice
for 60 minutes (B-2) according to your preference. After 3 seconds, the sterilization
process starts, the LCD screen shows process signs and temperatures inside (B-3). When
the sterilization process is nished, it automatically continues to dry out and LCD screen
shows the dry out time left. After dry out process is nallised it automatically alarms 6
times and turns o .
Round tank
Bottle shelf
Lid
Nipple shelf
Publicité
