SmartBidet SB-3000 Manuel De L'utilisateur page 16

Installation
6
5
Put the rubber nuts into the fixing
holes of the toilet.
Nuts
7 Push the main unit onto the base
plate until hearing "click" sound.
※ Check for any water leaks.
16
6
Put the bolt into the bolt case and align it
with the top of the base plate. Insert bolt
with bolt case onto the base plate. After
this is done, insert it into the rubber nuts
with screwdriver.
Screwdriver
Bolt
8 Connect the flexible tube from the side of
the T-valve to the SmartBidet's valve in
order to fill the tank with water.
※Customers should use the new hose set provided
with the product. Do not use used set again.
Bolt Case
Base plate