When the battery charger is connected to the e-scooter, all the electric functions
and the motor are disabled to avoid overheating or damages to the components.
Make sure that mains voltage corresponds to what is indicated on the
battery charger.
e• Once charge is complete, disconnect the cables and close the cap (30) in the battery charge
socket.
12.1 - CARE OF THE BATTERY
- The battery must be charged after each use.
- If the e-scooter is not used for a prolonged period of time, it is recommended to charge the bat-
tery at least once a month. If that does not happen, the battery enters a self-protection status
and cannot be charged. In this case, contact your retailer.
- The battery charger is equipped with a self-protections function against overcharging, the bat-
tery automatically stops charging once 100% of the charge is reached.
- Do not use the battery charge in wet or damp environments.
- Do not charge the battery if the socket (30), the charge cables or the battery charge are wet or
damp.
- Charge the battery when only the last notch remains on the display.
- Do not charge the battery if it shows signs of damage or leaks of liquid.
- Damage caused by under-charging will not be covered by the warranty.
EN
99