Costway ET1381DE Manuel De L'utilisateur page 3

This product has passed CE certification.
Please read through carefully and understand these instructions before use.
And you shall not disassemble it without permission.
1. Safety Instructions
General safety instructions for electric tools
Danger!
Read all safety regulations and instructions.Any failure to follow the safety
regulations and instructions may result in an electric shock, fire and/or serious
injury. Keep all safety regulations and i instructions in a safe place for future use.
The term "electric tool" used in the safety instructions refers to electric tools operated from the
mains power supply (with a power cable) and to battery operated electric tools (without a
power cable).
a) Workplace Safety
1) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
b) Electrical Safety
(1) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
(2) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
(3) Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
(4) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
(5) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
(6) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
C) Personal Safety
(1) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious personal
injury.
03