OXFORD BABY MONTAUK 12295 Instructions De Montage page 5

THIS STEP REQUIRES:
A. Guard Rail (1 pc)
FIG.5
-Insert the Allenbolt 3" (75 mm) (B) & Spring Washer (C) through 2 holes in the stabilizer bar and bottom
rail of Guardrail (A) as shown in FIG.4.
-Insert the Allenbolt 1-3/4"(45 mm) (F) through the hole of middle position of mattress spring in the
Footboard post and side rail of Guardrail (A) as shown in FIG.5.
-Tighten all bolts with Allen key (D). Assembly complete as shown in FIG.6. Thank You!
120-12295-V-01
STEP 3 " ASSEMBLY THE GUARD RAIL "
D. Allen key (1 pc)
(F) Allenbolt 1-3/4"(45 mm) (1 pc)
D
F
FIG.4
C
(B) Allenbolt 3" (75 mm) (2 pcs)
C. Spring washer (3 pcs)
D
B
C
5 of 5
FIG.6