Publicité
Les langues disponibles
Les langues disponibles
Remove The Problems
Remove the problems
Alarm Code
Description
Reason
Door is not closed properly.
Door lock
E30
problem
Please call up service line if there are still troubles.
Tap is not opened or water
Water injecting
flows too slowly.
problem when
Inlet valve filter is blocked.
washing (water
Inlet pipe is twisted.
E10
injecting time
If water is not supplied
exceeds 5
minutes)
Please call up service line if there are still troubles.
Outlet hose is blocked or
Drain problem
twisted
while washing
E21
Drain pump is blocked
(drain time
exceeds 3 minutes)
Please call up service line if there are still troubles.
Please call up the service line if there is any other problem.
Solution
Restart after the door is closed
Open the tap or wait till
the water supply
becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in
the room.
Wash and straighten outlet
hose.
Wash drain pump filter
P.27
Appendix
Appendix
Care Lable
Illustration
Graphic Symbol
Hand Wash
Washing (including Machine
Wash and Hand Wash)
Dry Clean
Warmly Dry Clean
Bleach
CI
Tumble dry
Iron
Steam Iron
Medium Temperature and
Max. Temperature 150 C
Line Dry
To avoid fire, electrical shock and other accidents, please remember the following
reminding:
- Only the voltage indicated in power label can be used. If you are not clear of
the voltage at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the
washin machine will reach 12A. Therefore, please make sure the power
supply units (current, voltage and cable) can meet the normal load
WARNING
requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will
not trip the people or other things and be damaged. Special attention shall be
paid to the socket. It shall be plugged into the sockets easily and attention
shall be paid to the plug location.
- Do not make the wall-mounted socket overloaded or cable extended.
Overloading of the wiring may cause fire or electrical shock. Do not pull out
power plug with wet hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole
socket. Carefully check and ensure that your socket is properly and reliably
earthed.
Illustration
Graphic Symbol
No Machine Wash
Do not Wash
No Dry Clean
No Wring
No Bleach
CI
Do not Tumble Dry
Do not Iron
Iron with Cloth
Dry after Wash
Line Dry in Shade
P.28
Publicité
