Publicité
2: Pair the S3 with your Phone
1. Slide the power switch to the ON position.
2. The S3 will announce the available languages. Tap
the
symbol when you hear your language.
3. The S3 will now talk you through the pairing
process.
4. The pairing code is
If you select the wrong
you switch it back on your S3 will ask you to select the language again. If this does not
work, reset your S3 and start again (see
If the S3 does not go into pairing
BlueAnt
All manuals and user guides at all-guides.com
0000
(four zeros).
language: turn off your S3 without completing the pairing. When
"Reset the S3" on page 18
mode: hold down the
Slide the switch to power on
then follow the prompts
symbol for about 6 seconds.
BlueAnt
for help).
5
Publicité
