Publicité
Les langues disponibles
Les langues disponibles
Turn ON the laser tool:
Short press Power Button to turn laser tool ON
Turn OFF the laser tool:
Step 1, Slide the pendulum/transit switch to the Locked Position.
Step 2, Press the power button and hold for 2 seconds to turn the laser tool OFF.
Note: The laser level can only be turned off when the pendulum/transit in its Locked Position.
Switch to Pulse Mode:
Long press the power button to turn the Pulse Mode on
Note: Laser level can work with Laser Receiver under pulse mode.
LED Power Indications:
LED
Self-leveling Mode
is enabled when the pendulum/transit is switched to the unlocked position.
The laser beam(s) blink fast when tool is out of self-leveling range(4°±1°).
Manual Mode
is enabled when the pendulum/transit is switched to the locked position.
is enabled to position the laser tool at various angles to project non-level straight lines or points.
The laser beam(s) will blink about every 3-5 seconds to notify the user. Notice: The laser beam(s)
projected in manual mode cannot be used as a horizontal or vertical reference in nature
Pulse Mode
Under pulse mode, Laser tool can work with a laser detector for working in a brighter environment
or a larger working distance
Long press the power button to turn on the Pulse Mode.
Long press the power button again to return back Normal Mode. Notice: The laser beam is dimmer
in pulse mode.
Note:
Due to product improvement，appearance and specifications may differ Working distance varies
depending on the operating environment.
Charging
The product is equipped with 3.7V/4500mAh lithium battery, which is built-in and non-removable.
Please charge it if it can not be turned on or there is no power indication after starting up.
Please use charging adapter with DC 5V and 1A/2A to charge it, the charging port is the USB Type C
port. The battery icon
The battery icon
Operation Modes
Capacity
75%-100%
50%-75%
25%-50%
0%-25%
will be displayed in scrollable way during charging process.
will be displayed and flashing when the charging process is completed.
- 04 -
Publicité
