Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Operation Instructions
1.
Remove part (A) from part (B) by unscrewing the 2 screw
caps. Turn the operation switch (Fig. 2) to ON (|) position,
the Solar Lamp will automatically operate dusk to dawn.
2.
Reattach part (A) to part (B) and secure with the 2 screw
caps.
Installation Instructions
Anchor Installation (Fig. 3)
1.
Insert the Turning bar (H) in the hole through the
Auger stake (G).
2.
Place Auger in desired location and apply downward
pressure while turning the Turning bar clock wise.
3.
Occasionally check the Auger Level Tool (Fig. 3) to ensure
your digging is straight.
4.
Stop turning once the ground stop ring has reached ground
level, see Fig. 1.
5.
Remove the Turning Bar.
TIP: There are specific types of screws for specific surfaces. If
unsure of the appropriate type of screw to use on your desired
surface please consult a professional.
FIG. 3
Publicité
