Hoover H-FRIDGE 500 LITE Mode D'emploi page 5

➀
➀ ON/OFF key, used to switch on/off the appliance.
➁ SET key, used to select the fridge temperature or the special functions like.
➂ Super Cool Icon, shows if the function is activated.
➃ Temperature levels, show which is the selected temperature.
Use
•
Plug on the appliance. The appliance will turn on automatically.
•
The temperature will automatically set at 4 °C in the fridge and -18 °C in the freezer.
•
To change the temperature, with the fridge door open, press the SET key. When the setting
increases, the corresponding LED light will turn on. An acoustic signal is made every time
the SET key is pressed and the temperature is changed.
•
In case of power loss, the last cooling level set will be restored.
•
To restore the default setting, at the screen lit, keep pressed the TEMP button, and then
press ON/OFF button 5 times in 5 seconds.
•
Under the normal operating condition (in spring and autumn), it is recommended to set the
temperature at 4 °C. In summer when the ambient temperature is high, it is recommended
to set temperature at 6~8 °C, so as to guarantee the fridge and freezer temperatures and
reduce the refrigerator continuous running time; and in winter when the ambient
temperature is low, it is recommended to set temperature at 2~4 °C to avoid frequent
start/stop of the refrigerator.
Customized temperature
From the app, it is possible to customize the temperature of the fridge compartment. The temperature
can be set with 1 °C sensitivity and it is possible to select a temperature from 2 °C to 8 °C in the
fridge. An acoustic signal is made every time the temperature is changed. When the temperature is
selected by the app, there is no indication on the control panel, all the temperature LED lights are
turned off, while only the WiFi icon is turned on.
USE
➁ ➂
EN 3
➃ ➂ ➃