Aritech TX-2810-03-4 Manuel D'installation page 7

Specifications
Detection range Programmable: 10 m / 30 ft., 20 m / 66 ft., or
30 m / 98 ft.
10 to 70° detection angle, 30 x 24 m /
Coverage
98 x 79 ft. coverage max.
180° pan, 90° tilt
Adjustment
Fresnel lens 28 zones for each detection element, which
can be masked with the curtain sliders
Double silicon shielded quad element
Customized optics
eliminates 50,000 lux of white light
LED Green: Detector alarm
Batteries 2X 3 V CR123 (3 years)*
3X 3 V CR123 (up to 5 years)*
50 µA
Current
Frequency band 868.000 MHz - 868.600 MHz
Operating frequency 868.300 MHz
Maximum E.R.P. 14 dBm
Pulse count 1 or 2
Temperature Analogue (thermistor) and digital sensitivity
compensation adjustment
Digital microprocessor with non-volatile
Control
memory
Walk test Output test mode with LED indication.
−25 to +65°C / −13 to 149°F
Operating temperature
Housing High impact ABS plastic with HDPE cover,
UV stabilized
Dimensions, W x H x D 125 x 175 x 130 mm / 4.92 x 6.89 x 5.12 in.
Weight 334 g net, 555 g gross / 11.77 oz net,
19.68 oz gross
Mounting height Variable up to 6 m / 20 ft.
Optimum height 3 m / 10 ft. for full range
* Under normal operations
Regulatory information
Manufacturer PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
Environmental IP55
class
P/N 1079514 (ML) • REV H • ISS 14DEC20
or scan the QR code.
European Union Carrier Fire & Security hereby declares that this
directives device is in compliance with the applicable
requirements and provisions of all applicable rules
and regulations, including but not limited to the
Directive 2014/53/EU. For more information see:
www.firesecurityproducts.com
REACH Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
This product may contain a battery that cannot be
disposed of as unsorted municipal waste in the
European Union. See the product documentation
for specific battery information. The battery is
marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling return the
battery to your supplier or to a designated
collection point. For more information see
recyclethis.info
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
recyclethis.info
Contact information
www.firesecurityproducts.com or www.aritech.com
For customer support, see www.firesecurityproducts.com
DE: Montageanleitung
Lieferumfang
Der Lieferumfang umfasst:
•
1 x TX-2810-03-4
• 1 x Bohrschablone für die Montage
•
2 x CR123 3 V Lithium Batterien
• 2 x 31,75 mm Dübel
•
2 x 31,75 mm Schrauben
•
1 x Linsenmaske
• 2 x zusätzliche Vorhangabdeckungen
• 1 x Sabotageführung
• 2 x Sabotagekappen (verschiedene Längen)
•
1 x Klemmwerkzeug
•
1 x Montageanleitung
•
1 x Vorderabdeckungskappe
Einführung
Der drahtlose Außen-PIR 868 MHz Gen2 Bewegungsmelder
ist ein Außenbewegungsmelder, der für die Alarmauslösung
zwei unabhängige Infrarotsensoren verwendet.
Beide Melderkomponenten müssen ausgelöst werden, damit
der Melder einen Alarm aktiviert. Der TX-2810-03-4 verwendet
eine Quad PIR-Technologie für eine präzise, zuverlässige
Anwesenheitsdetektion.
7 / 36