Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONFIGURATION
Monitor setup under Windows 95/98/ME and 2000:
For Windows 95/98/ME and 2000 users: Installation of
the Belinea driver software is highly recommended. This
can be obtained from your Belinea dealer or downloaded
from Belinea's internet homepage at www.belinea.de.
Choose Support, Downloads, then Driver Files, and
download BELINEA.EXE by clicking on Driver
Download....
Copy the file to a folder on your hard disk (e.g.
C:\BELINEA), and double-click it to start decompression.
After decompression you will find the file BELINEA.TXT
in your folder, providing further information on how to install
the Belinea driver software.
BASIC SETUP
Automatic Image Adjustment ...................................
You can adjust the image settings (such as brightness,
contrast, image position, phase etc) manually or by using
the LCD monitor's automatic image adjustment feature.
This will adjust the image parameters to their optimal
settings for the current graphics mode. Press AUTO (
in fig. 5) to launch the automatic adjustment. The process
will take a short while until completed.
IMAGE SETTINGS USING THE OSD MENU
The OSD menu appears in a window on your screen. It
allows you to select the image settings you want to
change.
Figure 5. Monitor features
14 - Belinea 10 17 30
All manuals and user guides at all-guides.com
…
Monitor setup under Windows NT 4.0:
Under Windows NT 4.0 no separate setup file is required.
Select the vertical frequency and the number of colors
directly from within the "Settings" à "Control Panel" à
"Display" à "Settings" menu.
Mute (MUTE) ..............................................................
If your monitor is connected to your PC's sound card,
you can mute the sound by pressing the MUTE button
†
(
in fig. 5). Press the button again to turn the sound
back on.
How to open the OSD menu ....................................
ƒ
1. Press the MENU button (
OSD menu on the screen.
2. There are a total of 7 OSD submenus divided by
categories. Select the desired submenu by pressing
…
the OSD button
or
(
and
"OSD Menu Functions").
3. Press the OSD direction button
activate the desired function in the selected submenu.
4. Set the desired value using the OSD button
5. If you would like to adjust further functions in one of
the other submenus, select the option "MENU
SELECTION" using the OSD direction button
Repeat steps 2–4 to make further adjustments as
needed.
6. The OSD menu automatically disappears if no changes
are made for more than 30 seconds (default setting).
The current settings will be saved. You can close it
manually by pressing the MENU button.
in fig. 5) to display the
†
in fig. 5; see section
„
(
in fig. 5) to
or .
.
Publicité
