Probuilder 43670 Manuel D'instructions page 45

General safety instructions
Warning! When using this compressor,
observe the following basic safety
precautions to ensure protection against
electric shock, risk of injury and � re. Read
and follow these instructions before using
the device.
1. Keep your work area tidy and in order.
- Disorder in the work area can lead to
accidents.
2. Consider environmental in� uences
- Do not expose the compressor to rain.
- Do not use the compressor in a damp or
wet environment.
- Ensure that there is proper lighting in the
working area.
- Do not use the compressor in areas
where there is a risk of � re or explosion.
3. Protect yourself against electric shock
- Avoid physical contact with grounded
parts (e.g. piping, radiators, electric
stoves, refrigerators)
4. Keep other persons away
- Prevent other persons, especially
children, from touching the compressor
and/or the cable. Keep them away from
your work area.
5. When not in use, store your compressor
safely
- The unused compressor should be stored
in a dry, elevated or locked location,
beyond the reach of children.
6. Do not overload your compressor
- You will be able to work better and more
safely in the speci� ed performance
range.
7. Use the right type of compressor
- Do not use low-power machines for
heavy work.
- Do not use the power tool for purposes
other than for which it was intended.
8. Wear appropriate clothing - Do not
wear loose clothing or jewelry, they
could be caught by moving parts.
- When working outdoors, non-slip
footwear is recommended.
- If you have long hair, wear a hair net.
9. Use protective equipment
- Wear protective goggles
- Use a respiratory mask when the work
you are doing generates dust.
10. Do not use the cable for purposes other
than for which it was intended
- To remove the plug from the power
outlet, do not pull the cable.
11. Avoid an abnormal body posture
- Ensure that you are in a safe stance
position, and keep your balance at all
times.
12. Maintain your compressor carefully
- Follow the instructions for lubrication.
- Check the compressor's connection line
regularly, and in the event of damage,
have it replaced by an approved
specialist technician.
- Check extension lines regularly and
replace them if they are damaged.
GB
45