Publicité
Les langues disponibles
Les langues disponibles
"CLICK N GO 2" FRAME ADAPTOR
Terralander
7) Install the universal adaptor
bolts
installed in step 5, six (6) M8-1.25 self-locking flange nuts
01
Figures 7 and 7.1). Do not tighten at this step.
07
05
01
04
Fig. 7
02
8) Make sure the plate is well centered on the vehicle. Tighten all nuts afterwards.
Fig. 8
9) Attach the positioning hook
self-locking flange nuts
The hook and hardware are included in the kit No. 373950.
Fig. 9
C
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
A-7815010-10 • Printed in China
ASSEMBLY INSTRUCTIONS
using the two (2) U-bolts
04
These bolts must
be inserted as
close as possible
to the outside of
the frame
to the frame using four (4) M8-1.25 x 20 mm hex. flange bolts
A
(see Figure 9).
C
B
C
A
installed in step 5, the two (2) M8-1.25 x 60 mm carriage
07
and the fixation plate
03
Vehicle frame
Front of the
vehicle
Fig. 7.1
373951
KIMPEX NO.
installed in step 5 (see
05
and four (4) M8-1.25
B
-10
4
Publicité
