Publicité
Les langues disponibles
Les langues disponibles
"CLICK N GO 2" FRAME ADAPTOR
Terralander
4) Remove the skid plates and drill with a ½ inch drill bit or drilling tool provided for this purpose (Kimpex product
No. 373920). Next, cut the square zone using an appropriate tool (see Figures 4 and 4.1). Reinstall the skid plates
afterwards.
Fig. 4
5) Pass the fixation plate
(2) U-bolts
in the holes previously drilled (see Figure 5).
07
05
Fig. 5
6) Pre-assemble the mounting plates
self-locking flange nuts
Fig. 6
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
A-7815010-10 • Printed in China
ASSEMBLY INSTRUCTIONS
in the frame and hold it in place using two (2) M8-1.25 x 60 mm carriage bolts
05
07
01
01
using the four (4) M8-1.25 x 25 mm carriage bolts
06
(see Figure 6). Do not tighten at this step.
03
02
03
Fig. 4.1
Holes to be used
04
06
373951
KIMPEX NO.
. Pass two
01
and four (4) M8-1.25
02
-10
3
Publicité
