Publicité
Les langues disponibles
Les langues disponibles
ZEPHYRONLINE.COM
Built-In Kit Installation
Follow the instructions below to install the kegerator under a countertop. Remove all shelving and
packaged components from the interior of the kegerator before proceeding.
NOTE: If you are using the kegerator as a full beverage cooler without a tap kit, it will not be
necessary to cut holes in the countertop or use the Zephyr Kegerator built-in kit. You can skip
the built-in instructions below and simply slide the kegerator under the countertop.
If you plan to use the kegerator with a tap kit to dispense beer, follow the instructions below to install
the kegerator using the built-in kit.
NOTE: The built-in kit is designed to accommodate a total countertop thickness between 1-1/4" and
2-1/4".
1. Drill a 3" diameter hole in the countertop. Refer to Beer Line Opening Top View on page 14 for
detailed dimensions. Install the threaded countertop flange to the countertop, making sure the
direction of the arrow points outward from the countertop (FIG. L). Secure using the included
wrench from underneath the countertop.
NOTE: It is recommended to seek a professional to help cut the hole because different countertop
materials will require different drill bits.
PRKB24C01AG & PRKB24C01AS-OD Use, Care, and Installation Guide
Installation Instructions
Threaded
Countertop
Flange
Threaded
Countertop
Flange
Wrench
FIG. L
25
Publicité
