neatfreak! neat-trax NFC03409 Instructions De Montage page 6

TRACK MOUNTING INSTRUCTIONS
JOIN TRACKS END TO END
First track must be already installed. Join two steel tracks together using the oval joiner clip (C), to
form one continuous long track. Insert the joiner clip into the notch on the end of the mounted steel
track base (A1). Line up the second track with the joiner clip and slide it towards the first track.
Mark, drill and mount the second track.
TRACK COVER MOUNTING
Install plastic cover (A2) by snapping it on top of the steel track base. Cover must face upright.
Hook the top edge of the cover over the upper edge of the track. Push the lower edge of cover to
snap it onto the lower edge of the track.
TOP
BOTTOM
Alternatively, plastic cover (A2) can be installed by sliding it onto the steel track base.
TRACK END CAPS
Add end caps (D).
C
Click!
Click!
6