Publicité
Les langues disponibles
Les langues disponibles
TRACK MOUNTING INSTRUCTIONS
SAFETY WARNING
Before installation, make sure the location chosen to install the rail system does not run the risk of
piercing any hidden cables or water pipes. In case of doubt, use a digital tracking device or consult
an expert. The rail system should be mounted on a stable surface. Do not overload.
CONCRETE WALL INSTALLATION
Level the steel track base (A1).
Starting from one end of the track, mark the position of the following eight holes with a pencil. Top
and bottom holes must be staggered.
Drill 8mm (5/16") holes over the markings. Insert the anchors (B1) into the 8mm (5/16") holes.
Mount the steel track base onto the wall using the screws (B2) provided.
B1
A1
B2
4
Publicité
