Publicité
Les langues disponibles
Les langues disponibles
※ The illustrations in this manual are provided to help
our customers' understanding of the product and
may differ from the actual product.
IMPORTANT PRECAUTIONS
Please read this manual carefully and retain it for
future reference.
WARNING
When lifting or moving
the product, at least two
people are required due to
the heavy weight of the
product.
The product may fall down,
causing a malfunction or
injury.
Do not let children hang on
or climb onto the monitor.
The monitor may fall down,
causing an injury or even death.
CAUTION
Do not install the product
in a place which is unstable
or vibrating or a place
where the product is not
completely supported such
as a shaky shelf or a tilted
place.
The product may fall down or
overturn, causing an injury or
malfunction.
Put the product on a flat
and firm floor.
The product may fall and
cause an injury.
When moving or handling a product assembled
with the Desktop Stand, be cautious about
damaging the exterior of the product.
When there is a stain or fingerprint left on the
surface, wipe it off gently.
When removing a stain, do not use excessive force.
Wiping with excessive force may cause scratches or
discoloration on the product.
How to Assemble the Stand
WARNING
▪ When assembling the Stand, put the product on a
table or a flat floor with its screen facing downward.
Here, first put a soft and fluffy cloth on the place,
and then put the product on top of it to prevent the
screen from being damaged.
▪ When assembling the Stand, check if the screws
are completely fastened. (If they are not completely
fastened, the product may lean forward after being
installed.) Avoid fastening the screws with excessive
force because otherwise the joint part of the screws
may be worn out, and the screws might come off.
▪ When assembling the product, do not use foreign
substances (oil, lubricant, etc.) on the screws. (It
may cause damage to the product.)
CAUTION
▪ Before installing a wall mount support, disassemble
the Stand by conducting the method to assemble
the Stand in a reverse order.
Publicité
