La Boite Concept LX SUPAKITCH Notice D'utilisation page 66

Please make sure to place all cables, as shown
below in order to avoid any contact between
the loudspeaker and the turntable. The shock
!
absorbers isolate the turntable from any un-
wanted vibrations and interferences produced
by the speakers. For an optimal sound restitu-
tion, place the shock absorbers, the cables and
the power cord as shown on the drawing below.
7.2 To connect the turnta-
ble to the loudspeaker :
On the source panel
1. Plug the other end of
the RCA cable to the RCA
input on the source panel
of the loudspeaker.
2. Connect your turntable's
ground wire to the ground
pin on the source panel of
the loudspeaker.
3. Plug in your turntable
to the power socket inside
the trapdoor with the pow-
er cord provided.
Adjusting the blotter on the
loudspeaker
8. Once everything is
connected :
Clip the 4 shock absorbers
in the groove of the pods
provided for this purpose:
there are 2 pods per
shock absorber.
Then place them in the
grooves located on the
loudspeaker. Put the
blotter down on the shock
absorbers and search for
a "click" sound.
Check if the blotter is in
the right position on the
shock absorbers and
make sure to place the
cables through the holes
designed for this purpose.
66