COMMISSIONING AND OPERATION
1.
Switch off all equipment to be connected make sure that the subwoofer
is in „off" mode.
2. Turn the „gain" control to minimum.
3. Move the „freq" control to the center position.
4. Connect the power cable to the power outlet.
5. Connect the amplifier and subwoofer as shown below.
6. Turn on the amplifier and subwoofer.
7. Start playing music.
8
Turn up the „gain" control carefully until you get the desired result.
9
Adjust the „freq" control according to your preferences.
10. You may want to use the phase control to adjust the sound result
according to the environmental conditions.
11. You can automatically turn on the subwoofer with the amplifier by
moving the
12. Use „auto" of the on/off switch
REPAIRS
•
Repairs to the unit should only be carried out by an authorised specialist
workshop.
•
Conversion or alteration of the product impairs product safety.
Attention Danger of injury!
•
Never open the product on your own authority and never carry out
repairs yourself!
•
Incorrect assembly may lead to malfunctions or total failure.
•
Never open the device under any circumstances.
Attention: No liability is assumed for consequential damage. Technical
changes and errors excepted! The warranty is void if the unit is tampered
with by third parties.
EN
15