Initial Start-Up - Fujitsu LifeBook TH700 Mode D'emploi

Initial Start Up
Display Latch
Button
Rotating
Display
Top Latch
Bottom
Latch
DC Power Jack
AC Adapter
LAN Connector
Power/Suspend/
Resume Switch
WLAN/Bluetooth Switch
All manuals and user guides at all-guides.com
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
• Press the display latch button and lift the display.
Lid
• Adjust the display until it is at a comfortable viewing angle.
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular
• Rotate the display 180 degrees (either direction).
• Push the latch down toward the display.
• Carefully fold the display down onto the keyboard.
Display Side
• Reverse this procedure to return to the notebook configuration.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the wireless switch to "On" to turn on the wireless
• Connect an Ethernet cable (not supplied) to the LAN jack on
5. Turn on Power
• Slide the Power/Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once
6. Register
ForMicrosoft
• After the operating system has initialized, the Windows Welcome
• Follow the on-screen directions as prompted. Accepting the
• If connected, you will be able to automatically access the Internet.
• Once connected to the Internet, select [Yes] to continue registration,
• Register your notebook with Fujitsu by going to our website at:
7. Activate Additional Utilities,
Applications, & Drivers
• Check to be sure the WLAN switch is on. The Pen and touch
EnsurethattheACadapterisconnectedandsupplying
powertoyournotebookbeforeactivatingClickMe!Itwill
take25to30minutesforClickMe!toinstallandconfigure
yourdriversandutilities.
the air vents are not blocked.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
to the keyboard.
Be sure to rotate the display in the opposite direction.
device, or—
your notebook and to a wall jack or to Ethernet router.
successfully completed, the operating system will begin
the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or Auto/Airline adapter to use your notebook.
Windows 7
® ®
screen will appear. Accept the Microsoft
Agreement and the Fujitsu End User License Agreement
to proceed.
automatic update feature is recommended.
If you are not connected and plan to register at a later time,
click the [Skip] button.
complete requested information, and click [Next] to complete
registration.
us.fujitsu.com/computers.
(Select configurations) functions will not be calibrated until
Click Me! is activated.
® Windows ® Licensing
(For Additional
Applications
and Utilities)
"Click me!"
3