OXFORD BABY WESTON 12188 Instructions De Montage page 4

STEP 2 " ASSEMBLY OF SLATS"
THIS STEP REQUIRES :
F. Allen key (2 pcs)
SCREW DRIVER (Not Included)
B. Slat (5 pcs)
C. Allen Bolt 1"(25 mm) (2 pcs) D. Screw 1 1/4"(30 mm) (10 pcs) E. Nut 3/4" (20mm) (2 pcs)
STEP 2.2
E
C
STEP 2.1
F
D
FIG 1
STEP 2.1:
- After attaching Rails (A) to headboard and footboard, place Slat (B) on the support strip of Rail (A), fasten
both ends of Slat (B) with screw (D).
- Tighten all Screws with Screw Driver (not included).
STEP 2.2:
- Insert Allen bolt 1" (25 mm) (C), through the top hole in the headboard from the inside and connect with
nut 3/4" (20 mm) (E).
- Tighten all bolts and nuts with Allen key (F). Assembly complete as shown in FIG 1. Thanks you!
100-12188-V-01
4 of 4