Wired Controller - Konix NARUTO Shippuden Mode D'emploi

WIRED
A
CONTROLLER
SWITCH CONSOLE
1. Connect the Switch console stand to the TV and turn
console on.
2. Connect the controller by USB connector into the switch
console stand, press the A button to connect, and when it
is connected, the LED indicator will be lit.
NOTE:
Please enter "System Setting", then "Controllers and Sensors"
then set the "Pro Controller Wired Communication" to "ON"
status
• Joystick adjustment
If you encounter problems with the Joysticks, please calibrate
them as follows:
Press «Home» to enter the main menu and choose
« System Settings».
Choose « Controllers and Sensors» and then «Calibrate Control
Stick», Press «A» to enter.
Now choose the Joystick you want to calibrate by simply pres-
sing it.
Press «X» to start the calibration process and execute the ac-
tions on screen.
PC COMPATIBLE
Directly plug the USB port to the PC console, by default it is set
to X-input mode.
No drivers are required on Windows, it will set up automatically.
MAINTENANCE:
Keep away from hot or wet environments.
Never force the USB plug into the Switch dock.
Keep away from liquids.
Do not try to open the controller
A