Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the floor lamp and parts from the Carton.
STEP 2.
Assemble the floor lamp like the drawing. This floor lamp
can adjust high and angel.
STEP 3.
Install the Lamp. This fixture is rated for 60 watt TYPE A
lamp.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
ADJUSTABLE
ADJUSTABLE NUT
ADJUSTABLE
PLUG CORD
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL295401 WILLA FLOOR LAMP
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4.
Plug cord into a qualified socket of properly rated
voltage.
STEP 5.
On/Off switch installed on top of the shade.
SWITCH
LAMP
Publicité
Manuels Connexes pour mitzi WILLA
Sommaire des Matières pour mitzi WILLA
- Page 1 HL295401 WILLA FLOOR LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL • • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE.
- Page 2 HL295401 WILLA FLOOR LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITÉ • • AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT L'INSTALLATION. ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU •...