Edenwood 975629 Consignes D'utilisation page 26

B
Product usage
NOTE:
• You can only connect the two speakers when you are in Bluetooth mode.
• If you turn the speakers off, the TWS connection will be removed. When you
turn the unit back on, the speakers will be paired automatically for TWS
function.
• You can only connect a EDENWOOD PARTY 400 FIRE speaker with another
EDENWOOD PARTY 400 FIRE speaker. You cannot pair the EDENWOOD PARTY
400 FIRE speaker with other models or brands of speakers that have TWS
capability.
• If you want to make a TWS connection with a different speaker, remove previous
connections before attempting to connect with the new speaker.
• If you cannot successfully connect two speakers, turn off both speakers and
start the connection process again.
Operation
WARNING! Before plugging in and starting the speaker system, make sure that
all controls are turned off or set to a low level.
NOTE:
• You can use the speaker while it is charging but if the battery is too low the
speaker performance might be poor. Using a low volume setting will help to
improve the sound.
• To ensure excellent sound quality, we recommend that you disconnect the
charging cable from the speaker once charging is complete.
Playing music
1. Press the power switch to the on position (I) to turn on the speaker. A sound prompt will
play, the disco lights will turn on and HI will briefly display.
NOTE: If the unit is not used for 15 minutes, the speaker will turn off. Press any
button to turn the speaker on again.
2. Connect to your audio source as described in the Connections section.
3. To select BT, FM, USB or AUX IN mode, press and hold the
a USB stick, simply insert the stick into the unit and it will automatically start to play the
stored track or file.
24 EN
button repeatedly. To play