Edenwood 975629 Consignes D'utilisation page 25

B
Product usage
Pairing a Bluetooth (BT) device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1. Turn on the Bluetooth device (such as your phone or tablet):
• Go to settings on your device.
• Select Bluetooth and turn it on.
NOTE: If your Bluetooth device was previously connected to another device, remove
that connection before attempting to connect with the speaker.
2. To turn on the speaker, press the power switch to the on position (I). A sound prompt
will play, the disco lights will turn on, HI will briefly display on the screen and then BLUE
will flash on to show the speaker is searching for a Bluetooth device. (If the speaker is
already turned on and/or it is in another mode, press and hold the
flashes on the screen.
3. When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD PARTY
400 FIRE, select the name and confirm the connection. A sound prompt will play to confirm
that the devices have paired.
NOTE:
• If the speaker's Bluetooth name does not appear on your Bluetooth device,
move the devices closer together. If that does not work, turn the devices off
and then on again before starting the pairing process again.
• When pairing the units, make sure they are not more than 10 metres apart
and there are no physical obstructions between the units.
Connecting two speakers (TWS)
You can connect two EDENWOOD PARTY 400 FIRE speakers to an external audio device. This
function only works in Bluetooth mode.
1. Make sure that both speakers are not connected to any other Bluetooth devices.
2. Place the speakers within 10 metres (with no obstructions) of each other.
3. Turn on both speakers and a sound prompt will play.
4. When both speakers are in BT mode (BLUE flashes on both screens), connect the external
Bluetooth device through its Bluetooth settings to one of the speakers (this will be the
master speaker). A sound prompt will play to confirm the connection.
5. Press and hold the
two speakers are connected in TWS mode.
6. To disconnect TWS, press and hold the
button on either speaker. A sound prompt will play to confirm the
button on either speaker.
23 EN
button until BLUE