Dab Mode; How To Get Started - HDigit Snooze Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

How to Get Started?

1. Place your radio on a suitable shelf or table, connect the power adapter between your radio and the
main supply, extend the telescopic antenna, and press STANDBY to switch it on.
Note: Your radio has a built-in rechargeable battery, it will automatically start charging after
power connected and will automatically stop charging when charging completed. The Battery
Standby time is 20 hours and it can be perfectly used for a elektrosmog free healthy sleep.
2. For initial use, it will automatically run a full scan and save all the detected stations into its memory.
Note: In use, your radio will automatically run to your last listening station when it is turned on.
3. Once the scanning is done, the DAB/DAB+ stations will be displayed in alphanumeric order and the first station in
the list will be selected.
4. If no stations are detected, press MENU
Overview
5. Want to change to another program? Wait until the scanning is completed or while playing a DAB/DAB+
program, turn SELECT to cycle through stations
Note: If no DAB/DAB+ signal found in your area, relocating your radio may be necessary.
All manuals and user guides at all-guides.com
turn SELECT to 'Full scan'
press SELECT to confirm your preferred program.
press SELECT to confirm.
Snooze

DAB Mode

7

Publicité

Table des Matières
loading

Table des Matières