Monster FlatScreen SmartView 300M Guide D'utilisateur page 20

Adjusting Your TV's Tilt and Height
Tilting Your TV:
1) With a person on each side of the TV, turn the Pull 'n' Twist
downward as far as you can. This loosens the tilting adjustment bars
and initiates tilt.
2) To further loosen the adjustment
bars and increase ease of tilt, pull
outward on the round portion
of the handle. This initiates its
ratchet mechanism.
3) In ratchet mode, turn the handle
upward to its highest point.
4) Release the handle to disengage
ratchet mode. When handle clicks
into place, it's ready to be turned
downward again. Repeat Step 1.
5) To prevent stress on TV, ensure both
bars are tilted at the same angle.
6)
To lock the bars into place
at the desired angle, do the reverse
of the steps above. Turn
the handles upward and ratchet
as needed until the bars are secure.
16
Pull 'n' Twist handles
Pull 'n' Twist
™ ™
�
�
�