Christie RPMX-D132U Guide De Configuration page 4

NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
The equipment is designed and manufactured with high-quality materials and components that can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please
dispose of this equipment appropriately and according to local regulations. In the European Union, there are separate collection systems for
used electrical and electronic products. Please help us to conserve the environment we live in!
Copyright © 2008-2010 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered
trademarks or trade names of their respective holders. Canadian manufacturing facility is ISO 9001 and 14001 certified. Performance specifica-
tions are typical, but may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working condi-
tions. Performance specifications are based on information available at the time of printing. Every effort has been made to ensure accuracy,
however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the
right to make changes without notice or obligation.
WARRANTY
For complete information about Christie's limited warranty, please contact your Christie Dealer. In addition to the other limitations that may be
specified in Christie's limited warranty, the warranty does not cover:
(a) Damage occurring during shipment, in either direction.
(b) Projector lamps (See Christie's separate lamp program policy).
(c) Damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied by a supplier other than Christie.
(d) Problems caused by combination of the equipment with non-Christie equipment, such as distribution systems, cameras, video tape
recorders, etc., or use of the equipment with any non-Christie interface device.
(e) Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
(f) Damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel.
(g) For LCD projectors, the warranty period specified applies only where the LCD projector is in 'normal use. "Normal use" means the LCD
projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where 'normal use" is exceeded, warranty coverage
under this warranty terminates after 6000 hours of operation.
(h) Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your projector. Please see the Maintenance section for
specified maintenance items as they relate to your projector and/or model. Failure to perform maintenance as required, and in accordance with
the maintenance schedule specified by Christie, will void the warranty.