Ewbank Evolution 3 Conseils D'utilisation Et D'entretien page 3

Product Disassemble/Storage
Follow the assembly instructions in reverse order;
1. Unscrew the top handle section.
2. Unscrew the middle section.
3. Unscrew the bottom section from the black pivot arm of the sweeper.
Product Use
Turn the knob on top of the Evolution sweeper to select either
HI or LO brush height as required for the carpet surface
to be cleaned. HI is best suited for longer pile or thicker carpets.
LO should be used on low pile carpets and rugs.
Push the Evolution 3 sweeper along the carpet surface to be cleaned at a steady pace keeping the
sweeper unit level to the floor to remove everyday dust and dirt leaving your carpets clean and free
of debris.
To Empty the Sweeper
Empty your sweeper regularly to ensure maximum efficiency.
To empty, hold the sweeper over a (trash) bin and lift the lever
located on the top of the sweeper (see picture 1).
Tip the unit forward to clean the front pan and then tip the unit
backward slightly to empty the rear pans (see picture 2).
Release the lever to close.
Cleaning and Care of your Evolution 3 Sweeper
Regularly check the brushes and remove trapped fluff and debris to keep your sweeper operating
at maximum efficiency. The case can be wiped with a damp cloth but do not immerse the unit in
water or other liquids.
3
Picture 1
Picture 2