Hubbell CFB10FFDIVKIT Instructions D'installation page 2

5. Align and install vertical divider [4] as shown in FIGURE B.
6.
Install screws [5] enough as to engage the threads, FIGURE C. Do not fasten all the way as the vertical divider [4] will
need to be loose to install spacer [6], see FIGURE D.
7.
Install spacer [6] as shown in FIGURE D. May need to move vertical divider [4] outward, to allow gap to install
spacer [6]. Ensure spacer is seated properly on the screws [5], as shown in FIGURE F.
8.
Torque screws [5] to 9-12 lbs -in (1.0 - 1.3 N m), see FIGURE E.
9.
Refer to cover 610GCFFCVR and 610GTFFCVR series installation instructions to complete cover installation.
FIGURE B
FIGURE D
5
4
6
5
4
5
OPEN VIEW FROM TOP
FIGURE C
6
6
5
5
4
FIGURE F
5
4
FIGURE E