How To Use; Speed Setting - Tristar BL-4426 Manuel D'instructions

Inserting the Glass Jar:
Make sure that the blender is switched off (Switch in the '0' setting).
Place the jar assembly (7) on to the motor base (8) and press down until securely
engaged.

How to Use

Place the foodstuff you wish to process into the glass jar.
o
Put the lid on the glass jar and close securely. Place the measuring cap into the hole in the
o
lid and turn clockwise to lock.
Switch on the motor base:
o

Speed setting

1 (Low)
2 (High)
0
P (Pulse setting)
Push switch
(The switch does not permanently engage in the" P " or "Push switch" setting. You have to
hold the switch in the "P" or "Push switch" setting or push it repeatedly.
o NB: Operate the motor for a maximum of 2 minute or alternating 2 minute on, then
2 minute off to prevent overheating or consequent damage.
After using the blender, always move the switch into the '0' setting and pull out the mains plug.
All manuals and user guides at all-guides.com
Use
for light usage with liquids
for more solid consistency – for mixing liquids and solid
foodstuffs
stop operation
short, powerful impulse movements
for ice crushing and cleaning of the glass jar,but the
rotary switch in the '0' setting