Pleasant Hearth 23-68-48M Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
4. Insert dowels (CC) into predrilled holes in
top edge of left and right inner panels (G and
H). Insert dowels (CC) into predrilled holes in
base (D). Slip top shelf/side assembly over
dowels (CC) until assembly sits snugly on base
(D). Insert bolts (AA) through washers (BB)
through predrilled holes in inner panel glue
blocks, and into predrilled holes in top shelf (B)
as illustrated.
Tighten with screwdriver.
5. Insert dowels (CC) into predrilled holes in
top edge of side panels. Slip top panel (A) over
dowels (CC) and onto mantle assembly. From
underneath, insert bolts (AA) through washers
(BB) and into pre-drilled holes as illustrated.
Tighten with screwdriver.
6. Attach upper back panel (K) and lower back
panels (L) to back of mantle assembly using
screws (DD) through predrilled holes as
illustrated. Tighten all screws with screwdriver.
4
E
B
CC
G
D
5
A
CC
6
5
F
CC
H
L
K
L
BB
AA
BB
AA
DD