McCulloch MC1230 Mode D'emploi page 8

STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
JET NOZZLE / SCRAPER / EXTENSION HOSE / TRIANGLE BRUSH
1. Select one of the four accessories (Jet Nozzle shown as example) and push onto the Steam
Nozzle (A).
2. Rotate accessory until the yellow lock/release button snaps into the accessory hole (B).
NOTE: The Jet Nozzle, Scraper and Triangle Brush can be connected to the end of an
Extension Hose for reaching high or difficult spots. Connect the Extension Hose, then
connect your desired accessory in the same way as you would normally connect to the
Jet Nozzle.
A
UTILITY BRUSHES / SCRUB PAD
NOTE: These accessories connect to the Jet Nozzle, not the
Steam Nozzle.
1. Firmly press accessory onto tip of Jet Nozzle. Press it on as far
as possible to prevent steam leakage (See figure 1).
2. To remove Utility Brush, simply grip it firmly and pull it off Jet
Nozzle.
8 | ENGLISH
Assembling Your Handheld Steam
Cleaner
B
FIGURE 1