Safety Norms - BELLOTA TC 315-M Manuel D'instruction Et De Maintenance

GB

1. Safety norms. ...........................................................16

2. Technical characteristics. .........................................18
2.1. Thermal protector. .........................................18
2.2. Electric connection to mains .........................18
2.2.1. Three-phase machines. .....................18
2.2.2. Single-phase machines. ....................18
3. General characteristics .............................................18
3.1. TC315M cutting saw .....................................18
3.2. TC315T cutting saw ......................................19
4. Installation. ...............................................................19
4.1. Main tools ......................................................19
4.2. Mounting and dismounting instructions .........19
4.2.1. Mounting the legs ..............................19
4.2.2. Mounting the travel system ...............19
4.2.3. Fixing the cutting disc ........................20
4.2.4. Mounting the rule ...............................20
4.2.4.1. Graduated rule. ....................20
4.2.4.2. Aluminium rule. ....................20
5. Norms for use. ..........................................................20
6. Start-up .....................................................................20
6.1. Changing the disc .........................................20
6.2. Adjustment of separating cutter ....................20
6.2.1. 315 disc ..............................................20
6.2.2. 300 disc ..............................................21
6.3. Setting the cutting width ................................21
7. Connecting and disconnecting the cutting saw ........21
8. maintenance .............................................................21
9. Spare parts ...............................................................21
10. Trouble-shooting .....................................................21
11. Exploded diagram of cutting saw ............................44
12. Exploded diagram of motor ....................................48
13. Wiring diagram. ......................................................50
INSTRUCTIONS AND MAINTENANCE MANUAL
WARNING !
When using electric tools basic safety precautions should
always be taken in order to reduce the risk of fires, electric
shocks and personal injury.
Read these instructions carefully before using this product
and then keep them safe.
BELLOTA HERRAMIENTAS, S.A. reserves the right to
carry out modifications whilst conserving the basic
characteristics of the machines.
1
SAFETY NORMS
The following norms should be strictly followed to prevent
any possible accidents.
- Keep the work area clean. Untidy work areas and benches
can cause damage.
- Protect the work area:
- do not expose the machine to rain.
- do not use the wood cutting saw in damp or wet places.
- keep the work area well lit.
- do not use the wood cutting saw in the presence of
liquids or inflammable gases.
- Place the machine on a surface which is:
- solid
- levelled
- dry
- vibration-free
- Avoid bodily contact with earthed surfaces.
- Remove all objects from around the machine. (The cutting
saw must always be free of all objects or tools).
- Use suitable clothing. Do not wear loose clothes. Before
beginning work remove rings, watches, bracelets, etc that
may become caught on moving parts.
- Non-slip footwear is recommended when working outside.
- Use a protective cap to cover long hair.
- Use ear protection. The noise level in work premises tends
to be approximately 85 dB.
- When working with the machine always use protective
gloves and goggles.
- Use a protective face mask if the cutting operation produces
dust.
- Never pull on the cord to unplug the machine from the
16