Publicité
INSTRUCTION SHEET
ROUND CANOPY
ASSEMBLY
SQUARE CANOPY
ASSEMBLY
4. ATTACH CANOPY ASSEMBLY TO CEILING:
•
ROUND CYLINDER-
•
SECURE CANOPY ASSEMBLY TO PENDANT STRAP
WITH (2) #8-32 MACHINE SCREWS.
•
SQUARE CYLINDER-
•
LOOSELY SECURE CANOPY ASSEMBLY TO PENDANT STRAP WITH (2) #8-32 MACHINE SCREWS.
•
ROTATE CANOPY ASSEMBLY UNTIL CANOPY IS IN DESIRED ORIENTATION.
NOTE: IF DESIRED ORIENTATION CANNOT BE ACHIEVED, UNSCREW CANOPY ASSEMBLY &
LOOSELY ATTACH TO PEM NUTS 90 FROM ORIGINAL PEM NUTS. ROTATE CANOPY ASSEMBLY IS
IN DESIRED LOCATION
•
CAREFULLY UNSCREW MACHINE SCREWS & SECURE LOCKING SCREW.
•
SECURE CANOPY ASSEMBLY TO PENDANT STRAP WITH (2) #8-32 MACHINE SCREWS.
INST KV NONI 2.5/3.5in CYL CS SU
TITLE
03/02/22
DATE
93147484
DWG NO
ROUND CYLINDER
SQUARE CYLINDER
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY
FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED
REV
HEREIN. IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR
2
THE INSTALLATION OF IT, PLEASE CALL KURT VERSEN ENGINEERING AT
781-294-0100
kurtversen.com | 781-294-0100 | techsupport@kurtversen.com
3 of 8
LOCKING SCREW
Publicité
