Battery Replacement - HOGERT HT1E630 Mode D'emploi

NCV Sensitivity
NCV sensitivity indication
Operating temperature
Storage temperature
Altitude
Security Class
Power supply
Dimensions
Weight

BATTERY REPLACEMENT:

As shown in the figure below:
1. Rotate the battery cover as shown in the figure
2. Remove the old battery
3. Install a new battery according to the battery polarity indication.
Warning: To avoid electric shock, do not use before putting
on the battery cover in its original place.
6
automatically 3 sensitivity levels (high, medium and low)
high (red light on), medium (green light on) and low (flashing green light) by means
of alarm sounds at different frequencies and LEDs of different colours.
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
0~40 °C
-10~50 °C
<2000m
CE CAT.III 1000V /CAT.IV 600V
Batteries 2×1.5V AAA
156mm×20mm×20mm
45g
GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków, www.hoegert.com