Rear Panel Connections - Cambridge Audio AXN10 Manuel D'utilisation

8

Rear panel connections

Last updated: février 2, 2023 03:20. Revision #8827
1. Line output.
Fixed level analogue output used to provide a signal to an integrated amplifier, pre-amp or recording device.
2. S/P DIF coaxial digital output.
3. TOSLINK digital output.
4. WiFi and Bluetooth antenna
Ensure both antennas are connected securely before use.
5. Service port.
For servicing use only.
Connecting any other device here may result in damage.
6. USB Socket
Connection for a USB flash drives.
The USB port is not intended for connection to Apple mobile devices, no functionality, charging or otherwise, is supported.
7. Ethernet
Use to connect the AXN10 directly to a router.
8. WiFi antenna
9. AC Power Socket
Once you have completed all connections to the amplifier, plug the AC power cable into an appropriate mains socket then switch on.