Qlima FC 156 Manuel D'utilisation page 46

• CAUTION: To reduce the risk of electric
• After making the wire connections, the
• The splices after being made should be
• This device complies with part 15 of the
• WARNING: To reduce the risk of fire or
GB
46
foreign objects in between rotating fan
blades.
shock, disconnect the electrical supply
circuit to the fan before installing light kit.
wires should be spread apart with the
grounded conductor and the equipment-
grounding conductor on one side of the
outlet box and the ungrounded conductor
on the other side of the outlet box.
turned upward and pushed carefully up
into the outlet box. Conductor wiring
identified as grounded is to be connected
to a grounded conductor of power supply.
Conductor wiring identified as ungrounded
conductor is to be connected to an
ungrounded conductor. Conductor wiring
identified for equipment grounding is to
be connected to an equipment-grounding
conductor.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
electric shock, this fan must be installed with
a general use, isolating wall control/switch.
WARNING: To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
NOTE: The important safeguards and
instructions appearing in this manual are