First Start - SOUNDPEATS H2 Manuel D'utilisation

First Start

Open the charging case lid and take out both earbuds, the remove the insulting film and
put them back.
When the charging case has power, open the lid of the charging case, the two
•
earphones will turn on and enter the pairing mode. For the main earphone, the
red and white lights will flash alternately; for the secondary earphone, the white
light will keep on.
Activate the Bluetooth on your device and choose "SOUNDPEATS H2" to connect.
•
Reset
1. Clear the pairing data from your device.
2. Place back both earbuds, make sure
they are in charging.
3. Press and hold for 10 seconds until the
red and white lights of both earbuds flash
twice alternately, rese complete.
Wearing
Identify the left and right earbuds.
•
Rotate earbuds and find the most comfortable position.
•
4