SSS Siedle BCMC 650-0 Manuel D'installation page 4

English
Installation
Application
Bus colour camera module for
Siedle-In-Home-Bus: Video. Instal-
lation within Siedle Vario 611-...
Integrated heating with thermostat,
infrared lighting and electronic
control system.
Important installation
instructions
The following installation situations
must be avoided without fail:
• Direct ajour light
• Direct sunlight
• Very bright picture background
• Highly reflective walls opposite the
camera
• Lamps or direct light sources
• Recommended mounting height
appr. 1.60 m to centre camera.
Scope of supply
a Camera module BCMC 650-...
b Terminal block
c Allen key size 2.5
d This product information
Mounting
1 Recommended mounting height
appr. 1.60 m to centre camera.
For information on mounting the
camera module, see the "Vario
mounting instructions" enclosed
with mounting frame MR 611-... .
2 Note the mounting position of the
camera, the type designation must
be legible at the top back of the
module.
3 The angle of vision of the camera
module can be pre-adjusted
horizontally and vertically by around
30° depending on the mounting
situation.
On the back of the camera, release
the centrally positioned screw by
screwing the Allen key one turn to
the left. Position the camera eye
using the Allen key to the required
viewing direction.
4 Fix the camera eye in the required
position by turning the screw. Do
not fasten the screw too tightly.
Terminal assignment
TaK/TbK = In-Home bus: Video,
camera branch
Ta/Tb = Connection of the
BTLM/BTLE door
loudspeaker
Vc/GND = Actuation from the
door loudspeaker to
turn the camera on
b/c = 12 V AC supply for
heating
Pilfer safeguard
In order to protect the Vario
modules from unauthorized access,
the pilfer safeguard controller
DSC 602-... can be optionally used
in conjunction with the ZDS 601-... .
This can be used to protect the
inserted modules from
unauthorized access.
Installation
Installation and commissioning are
described in the Siedle-In-Home-Bus
Video system manual.
Servicing
Exchanging the existing
CMM 611-... with the BVSM 650-...
is described in the system manual.
Specifications
BCMC 650-0
• Colour system PAL
• Image pick-up CCD sensor 1/3"
752 x 582 pixel (horizontal/vertical)
• Lens attachment 2.9 mm
• Automatic day/night switchover
• Aperture angle horizontal appr.
80°, vertical appr. 60° (due to the
wide-angle lens, peripheral straight
edges will appear curved)
• Additional mechanical adjustment
range by appr. 30° on the horizontal
and vertical
• Resolution horizontal 450 lines
• Integrated infrared lighting
• 2-stage heating 12 V AC max.
100 mA
• Temperature range -20°C to
+ 40°C
• Supply via In-Home bus
• Dimensions width x height x build-
up height 99 x 99 x 32 mm
BCMC 650-1
• NTSC colour system
• Resolution horizontal 768 lines,
vertical 494 pixel
• For other specifications, see above
3